Home Samples Contact



BAYSTILE has a completely self contained mobile unit, outfitted with state of the art bead blasting and retrieval equipment.

 The first step in our process is to lower the water level in your pool about six inches, so that we have access to the entire tile beam. We use our own equipment, and we route the water out to the street, or to nearby drains that go to the sewer or street. We do not need to completely drain your pool.

Next, we employ our safe and effective bead blasting system, in which glass beads are dispensed under low pressure, directly at the affected areas. Unlike the scraping forces involved when using pumice stones, putty knives or other scrapers, our bead blasting technique utilizes a bouncing or peen action that gently dislodges the calcium, and scales from the tile. The result is completely cleaned tile, free of calcium and scales with the protective glaze unharmed.

 Once the tile is cleaned we apply a silicon sealant and vacuum out the entire pool with our retrieval system.  During this process, the used beads and dislodged calcium are captured by our equipment, returning clean water to your pool. Since our glass beads are completely safe (free of silica and any other harmful agents), swimmers may enter the pool immediately. Our glass beads will not cause irritation to the skin or eyes, nor does it pose any other health dangers. The chemical balance of the pool water will not be compromised by any part of our procedure.

GIVE US A CALL 209-200-9800